SparkFun Humidity Sensor Breakout - HIH-4030

ER-625

2 Items

Breakout board for Honeywell’s HIH-4030 humidity sensor
SEN-09569

61.43 AED

-10%

68.25 AED

This is a breakout board for Honeywell’s HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor’s near linear voltage output, the data is very easy to process.

Voltage applied to the supply pins should be within 4-5.8VDC, and optimally at 5V. The sensor will typically only consume about 200μA.

This product comes as shown in the picture, with the HIH-4030 soldered onto the breakout board. The pins of the 3-pin header are spaced by 0.1".

Features:
  • Near linear, analog output
  • 4-5.8VDC voltage supply
  • All pins broken out to a 0.1" pitch header
  • Laser trimmed interchangeability
  • Low power design, typical current draw of only 200μA
  • Enhanced accuracy
  • Fast response time
  • Stable, low drift performance

Dimensions: 0.75 x 0.30 “ (19.05 x 7.62 mm)

Documents:

Image and content credit : Sparkfun

26AWG, 20 CM Male to Male Jumper wire

4.73 AED 5.25 AED -10%

26AWG, 20 CM Female to Female Jumper wire

4.73 AED 5.25 AED -10%

26AWG, 20 CM Male to Female Jumper wire

4.73 AED 5.25 AED -10%

PCB Solderable Male Header 40 Pins, 1 Row

1.42 AED 1.58 AED -10%

PCB Solderable Female Header 40 Pins, 1 Row

1.42 AED 1.58 AED -10%

40 x 1 Male Header: 90 Degree 

1.42 AED 1.58 AED -10%

Related Products