The Raspberry Pi Zero W with Wireless LAN and Bluetooth is here, its ideal to build projects around IoT, its does not comes with 40 Pin GPIO soldered, so you need to solder the headers/connectors/wires as per your requirement.It comes with a 1GHz BCM2835 single-core processor, the same as the B+ and A+, included with 512MB RAM.
Its setup is little more complicated than other Pis. Because of its small size, connectors on the Pi Zero are not standard. You need a Mini HDMI to HDMI adapter or cable to connect to your monitor and You also need a USB OTG cable to connect a USB device, as well as a unique CSI camera cable. Apart from all this, you need a microSD card with an operating system and a high-quality 5V power supply to power your board.
Note: You can download the Raspberry pi NOOBS image here.
- 802.11 b/g/n wireless LAN
- Bluetooth® 4.1
- Bluetooth Low Energy (BLE)
- 1GHz, single-core CPU
- 512MB RAM
- Mini HDMI and USB On-The-Go ports
- Micro USB power
- HAT-compatible 40-pin header pins
- Composite video and reset headers
- CSI camera connector
Product Dimensions: 66.0mm x 30.5mm x 5.0mm / 2.6" x 1.2" x 0.2"
Product Weight: 9.3g / 0.3oz
Image and Content from Sparkfun