Fast Vibration Sensor Switch (Easy to trigger)

ER-638

5 Items

Warning: Last items in stock!

Spring based sensor for vibration and shock measurements.

8.00 AED

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches. Inside is a very soft spring coiled around a long metal pin. When the switch is moved, the spring touches the center pole to make contact. So, when there's motion, the two pins will act like a closed switch. When everything is still, the switch is open. Great for basic projects and wearables!

Features:

  • Maximum Voltage: 12V
  • Contact Resistance: <10 ohm
  • Contact Time: 2 ms
  • Maximum Current: 20mA
  • Insulation Resistance: >10M ohm
  • Temperature Range: -40 to 80ºC
  • Operating lifespan: 100,000 cycles

  • Diameter: 5mm/0.2"
  • Height (w/ pins): 25mm/1"
  • Height (w/o pins): 15mm/0.6"
  • Weight: 0.3g

Image and content credit : Adafruit

Double Side Copper prototype pcb Universal Board/Universal Plate / Green Oil Plate / Test Plate  for Arduino and Raspberry Pi

5.00 AED

Double Side Copper prototype pcb Universal Board/Universal Plate / Green Oil Plate / Test Plate  for Arduino and Raspberry Pi

15.00 AED

2pin Cable 22 AWG Strip Red Black Connecting Wire 20cm DIY Cable

4.00 AED

2pin Cable 22 AWG Strip Red Black Connecting Wire 15cm DIY Cable

4.00 AED

1pin Cable 24 AWG Strip Black Connecting Wire 15cm DIY Cable

1.75 AED

1pin Cable 24 AWG Strip Red Connecting Wire 15cm DIY Cable

1.75 AED

SparkFun Arduino ProtoShield Kit

39.00 AED

Single Side Copper prototype pcb Universal Board/Universal Plate / Green Oil Plate / Test Plate  for Arduino and Raspberry Pi

15.00 AED

Single Side Copper prototype pcb Universal Board/Universal Plate / Green Oil Plate / Test Plate  for Arduino and Raspberry Pi

11.00 AED