Waveshare 10.1inch HDMI LCD (B) (with case), 1280×800, IPS

ER-354

1 Item

Warning: Last items in stock!

650.00 AED

1280×800, 10.1 inch Capacitive Touch Screen LCD (B), HDMI interface, IPS, supports various systems

Features:
  • IPS screen,1280×800 high resolution
  • Capacitive touch control, supports up to ten-points touch
  • When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free
  • When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
  • Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images
  • Supports BB Black, comes with Angstrom image
  • HDMI interface for displaying, USB interface for touch control
  • Back light control to lower power consumption

Note: To use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable

Case:

  • Material : high quality black Acrylic
  • Comes with back holder, 30°/45° tilt angle
  • Features mounting holes for Raspberry Pi 3B/2B/B+/A+/B, BB Black, Banana Pi

Installation Instruction

Hardware Connections:

Please make sure the connections are done in a right sequence, or else the LCD may not work well.

  1. Connect the Power Only Port of the LCD to a 5V 2.5A power adapter with a Type A to micro USB cable (Normally, the LCD will perform screen-clear and self-checking. If there is nothing displayed on the screen, please check whether the switch on the back side has been turned on. In case that the screen is ON, please check if the FFC cable is connected properly and in a good contact).
  2. Connect the Touch port of the LCD to one of the USB ports on your PC.
  3. Connect the HDMI port of the LCD to the HDMI port on your PC with an HDMI cable
When multiple displays are detected by your PC, the LCD can only be used to control the cursor on main display. So it is proposed to set the LCD as the main display.

Working with Raspberry Pi:

For the Windows OS on PC, the resolution of the LCD is automatically identified. Hence, you do not need to make the relative settings. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. For more detail information, please read the following section.

  1. Download the image file (zipped) into your PC, and extract it, then you will get a file with the expansion name .img
  2. Connect a TF card to your PC, and format your TF card with the software SD Formatter. Notices: The capability of TF card in used here should be more than 4GB. In this operation, a TF card reader is also required, which has to be purchased separately.
  3. Start the software Win32DiskImager, and select image file downloaded in the first step, then, click the button Write to program the system image file.
  4. When the programming finished, open the config.txt file under the root directory in the TF card, and add the following lines at the end of the file. Then, save the modification and pop-out the TF card.

max_usb_current=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1280 800 60 6 0 0 0

Save and connect the TF card to your Pi then power up.

Wiki

Package Content:

Weight: 0.8723 kg

  1. 10.1inch HDMI LCD (B) (with case) x 1
  2. Back holder x 1
  3. Spare screws x 1
  4. HDMI cable x 1
  5. USB type A plug to micro B plug cable x 2
  6. Power Adapter US Standard 5V 2.5A USB Output x 1
  7. DVD × 1

The Raspberry Pi 3 is the third generation of the Raspberry Pi .

190.00 AED

28/24AWG Cable with Ferrite Core, Gold Plated, 3 Feet Long Cable Id: 5457

14.00 AED

This kit now comes with Heat sink, perfect kit for beginners

304.00 AED

Kit Contains all the items to get started

304.00 AED

Open Source Media Center Kit with configurable MINI IR Remote

314.00 AED

Open Source Media Center Kit comes with Configurable IR Remote

314.00 AED

Related Products