Waveshare 7inch HDMI LCD (C), 1024×600

ER-226

1 Item

Warning: Last items in stock!

1024×600, 7 inch Capacitive Touch Screen LCD, HDMI interface, IPS, supports various systems

355.00 AED

Features:
  • 1024×600 high resolution
  • Capacitive touch control
  • Supports Raspberry Pi
  • Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
  • Supports BB Black, comes with Angstrom image
  • For other mini-PCs, driver is required and should be developed by users
  • Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen
  • HDMI interface for displaying, USB interface for touch control
  • Back light control to lower power consumption

For revisions under Rev2.1:

  • For the Raspberry Pi, comes with Raspbian driver (works with your Raspbian directly), and Ubuntu image
  • When work as a computer monitor, touch function is unavailable

Rev2.1 New Features:

  • Upgrade to IPS screen, wider viewing angle, more clear displaying
  • Standard HID protocol, easy to be integrated into your system
  • For the Raspberry Pi, supports Raspbian, Ubuntu, Windows 10 IoT, single touch, and driver free
  • When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free

Supported mini PC:
mini PCDriverImage
Raspberry Pi BRaspbianRaspbian
Raspberry Pi A+RaspbianRaspbian
Raspberry Pi B+RaspbianRaspbian
Raspberry Pi 2 Model BRaspbianRaspbian, Ubuntu, Windows 10 IoT
Raspberry Pi 3 Model BRaspbianRaspbian, Ubuntu, Windows 10 IoT
Banana Pi-Raspbian, Lubuntu
Banana Pro-Raspbian, Lubuntu
BB Black-Angstrom

Note :
Drivers can be added to your current system to support LCD display and touch control.
Images CAN NOT be used with your current system. They're stand-alone systems which support LCD display and touch control already.

Package Content:

Weight: 0.318 kg

  1. 7inch HDMI LCD (C) x 1
  2. HDMI cable x 1
  3. USB type A plug to micro B plug cable x 1
  4. RPi screws pack (4pcs) x 1
  5. DVD × 1

Working with Raspberry Pi:

For the Windows OS on PC, the resolution of the LCD is automatically identified. Hence, you do not need to make the relative settings. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. For more detail information, please read the following section.

Turn on the "backlight" switch then connect the LCD to your Pi (HDMI Port of LCD -> HDMI Port of Pi; USB Port of LCD -> USB Port of Pi; 5V~2A power supply). Download the Raspbian image from Raspberry Pi web site. Write the image to a TF card and add the following code to the end of /boot/config.txt:

max_usb_current=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0

Save and connect the TF card to your Pi then power up.

(Touch input working well means that the LED firmware is Rev2.1. If the lcd firmware is 1.1, touch function is unavailable, When work as a computer monitor.)

Note: The image in the CD is not used for Raspberry Pi 3. If a Pi 3 is in used, please download the latest Raspbian image from Raspberry Pi web site and do some proper settings following the steps above. Resolution of Ubuntu Mate OS or Windows 10 IoT Core OS can also be set properly by editing config.txt.

FAQ:

  • Why the LCD doesn't work with my Raspbian?
    • To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.However, for the first testing, you may want to use our provided image directly.
  • Why the LCD still doesn't work with the Waveshare provided image?
    • Make sure the hardware connection is correct and connects fine.
    • Make sure the image in TF card is burnt correctly.
    • The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. 
  • Which power supply should I use?
    • It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD.

The Raspberry Pi 3 is the third generation of the Raspberry Pi .

190.00 AED

28/24AWG Cable with Ferrite Core, Gold Plated, 3 Feet Long Cable Id: 5457

14.00 AED

This kit now comes with Heat sink, perfect kit for beginners

304.00 AED

Kit Contains all the items to get started

304.00 AED

Open Source Media Center Kit with configurable MINI IR Remote

314.00 AED

Open Source Media Center Kit comes with Configurable IR Remote

314.00 AED