This is the official case designed to fit both the Pi Zero and the Pi Zero W. Just snap the Raspberry pi into the bottom half of the enclosure, then snap fit the top. No additional tools needed.
The choice of three lids: a standard lid, a GPIO lid (allows access to the GPIO pins) and camera lid (allows the Raspberry Pi camera to be fitted neatly inside it). Each case included withh 4cm long CSI cable and four rubber feet.
Note: Raspberry Pi or Camera Module is not included with this
Image and Contents from Sparkfun
|10||10%||Up to 25.00 AED|
|50||15%||Up to 187.50 AED|
|100||20%||Up to 500.00 AED|